BDV Phantom 800 Specifikace stáhnout pdf (Strana 13)

. . . . .

INSTALLATION INSTRUCTIONS

SDI-DVI Converter Installation

DVI Converters: Installation & Operation Guide Edition 1.02 Introduction 7

To Install the SDI-DVI Converter

Before installing the SDI-DVI converter, connect the supplied power adapter to the unit and

plug it into an AC power source. Black Diamond Video recommends the use of a surge

protector.

1 Connect the 75 Ohm Serial Digital Interface source to the BNC connector labeled SDI

Input.

2 If desired, connect a 75 Ohm Serial Digital Interface output to the BNC connector

labeled SDI Output for loop-through connection to the SDI source.

3 Connect the DVI output of the converter to a Black Diamond Video-tested DVI cable.

4 Connect the other end of the DVI cable directly to the Black Diamond Video digital

video processing equipment in your installation, such as the Phantom 800 or CXPS.

5 The Link LED indicator on the converter flashes green when an active connection to

the converter is established.

Installation of the SDI-DVI Converter is complete.

FIGURE 7. SDI-DVI Converter installation

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Žádné komentáře

BDV Phantom 800 Specifikace Strana 13